PLEASE NOTE - NO FOREIGN SALES
The best and only Gamo-Theoben replacement trigger in the world. It's not just a trigger mod. Nothing, absolutely nothing compares to it.
NZHUNTER.COM CONTRIBUTES ALL PROCEEDS FROM THE SALE OF THIS TRIGGER TO FURTHERING AND PROMOTING THE SPORT OF AIRGUNNING IN NEW ZEALAND
The GRT-III trigger is redesigned and refined and is improved in both efficiency as well as feel over both of the previous two GTX models.
The GRT-III trigger blade is anodized in gold as was before. It will also now adapt to the Crosman Quest and the B-19 in most cases with no modification needed by the owner as was needed in some cases in the past but there may be a few exceptions.
The GRT-III trigger blade changes the internal geometry as well as the ergonomics of the original Gamo/Theoben type trigger and converts it from an allegedly 2-stage trigger to a true 2-stage trigger geometry while at the same time dramatically reducing the pull weight and not compromise the safety of the trigger. The ergonomic design change greatly enhances the trigger with a far more controlled trigger pull. Together they provide more accuracy, consistency and a vastly improved firing cycle, something that trigger mods cannot do. It's a matter of what you expect for what you pay for, and with the GRT-III trigger blade you get it all.
And just what does the GRT-III trigger blade fit?
The GRT-III trigger blade will fit almost any rifle using the Gamo type trigger including:
Cabela's Outfitter Series (all)
Crosman Quest 800
Crosman Quest 1000
Crosman Sierra Pro
Crosman G-1 Extreme
Daisy Model 1000 (Spain)
Gamo CFX series
Gamo Hunter all series (including the 1250)
Gamo Shadow all series
Gamo Nitro 17
Gamo 640 Carbine
Gamo (all late production rifles with metal trigger)
Some QB models like the 88
Some other TF models
And some others.
If your has a trigger similar to the B-18/19's or the Gamo's, there is an excellent chance that the GRT-III will work in your gun.
As in the past, every GRT-III trigger blade that is sold is completely assembled, tested and pre-adjusted in a Gamo trigger for the customer and all you need to do is drop it in on most guns. Installation instructions are provided. It's a very simple operation requiring a couple of screwdrivers and about 15 minutes or less for most people.
Take a look at the simple installation procedure, a PDF file courtesy of Chuck Adams. (Click Here)
Why The GRT-III?
We have sold hundreds of the GTX-II, GTX-III and now hundreds of the GRT-III trigger blades to satisfied customers. Why do they buy??? Because they are replacing the problem with a genuine fix, the complete trigger blade itself. They do this rather than attempting a less expensive trigger mod to rig or work around the true existing problem with mediocre or second rate repair. The GRT-III trigger blade resolves all of the trigger problems and not just reducing trigger pull. That and the superior beauty, quality, workmanship, it's safe and the fact that it works and that it has a long past with a long proven track record the world over.
It's not just the improved trigger pull that makes the GRT-III trigger so great. Just as important and even more so, are ergonomics of the trigger. It's what makes the big difference in the improvement of both accuracy and consistency. There are a couple of guys out there that market OEM trigger insert mods that will say that ergonomics doesn't matter.... but......, those that have owned both the trigger mods and the GRT-III trigger blade know the difference and given the choice, will choose the GRT-III trigger every time.
Be aware. As with almost all other successful products, there will always be someone attempting to come up with a better or cheaper idea that will undoubtedly prove to be inferior or substandard and perhaps even in some cases, dangerous. None of these will match the class, superiority and efficiency of the GRT-III trigger blade. There is nothing as a replacement part or mod that is even close to being comparable to it.
This product was added to our catalog on Tuesday 06 November, 2007.